+48 32 449-00-00 Facebook Linkedin

Category

Bez kategorii
Backflow flap
The backwater flap is used in systems Sewerage and drainage systems as a final device. It is used to prevent the backflow of water or sewage back into the system. Backwater flaps can be installed at the outlets of sewerage systems and embankment culverts (for drainage ditches and natural watercourses) to sewage channels with a...
Read More
SPS structured pipes DN3000 L=19000 x 3 pcs Oversize load deliveries Project in Scandinavia Manufacture of DN600 – DN3500 SPS structured pipes Ring stiffness: SN2-SN8 SN10-SN16 pipes are available upon request.
Read More
An oil/water separator with a sludge compartment, a lamella clarifier, an automatic closing mechanism and a 10-fold bypass Q=100 / 1 000 L/s Sludge compartment: V=20m3 Tank dimensions: DN 2500/2900 , L=10 900 / 11 300 Inlet/outlet: DN1200/DN 1400 Inlet bottom depth: approx. 1,5 metres below ground level Project in Bieruń (Poland)
Read More
Pressure range: PN20, PN25, PN32, PN40 PE100 sleeves: DN90 – DN1200 PE100 reducers: DN90 – DN1000 Reinforced sectional fittings with a 1:1 guaranteed pressure rating
Read More
We are pleased to announce that for the second time our company has been awarded in the Silesian Innovator competition organized by the Upper Silesian Agency for Entrepreneurship and Development as part of the “Enterprise Europe Network” project. In this year’s edition we received a distinction for producing the SRB motor boat. At the same...
Read More
S plastic oil/water separator with sludge chamber, lamella filter, automatic closure and 10-fold bypass Q = 100 / 1000 l/s Sluge chamber V = 20m3 Sizes – DN 2500 / 2900 , L=10 900 / 11 300 Inlet/Outlet – DN1200 / DN1400 Thanks to their wide range of usage, S plastic oil/water separators are suitable...
Read More
S plastic tanks made from polipropylen for electroplating process. We can prepare and produce any tank prepared for individual client needs.
Read More
1 2
PolandGerman